Unlike many filtration membrane suppliers PFi also provide | design | install filtration membrane systems. Titanium membrane is unique to all other membrane filtration materials.
•Membrane layer and support layer are both 100% titanium metal
•Longer filtration life
•Weight to strength is the strongest metal known
•Corrosion resistant to chlorine
•Handles full pH range from 0-14
•Processes liquid streams containing fat, oil and grease
•Can be steam cleaned and steam sterilised
•Paramagnetic – does not attract particulate to its surface
•Strong and only 350microns thick (0.35mm)
•Available in MF and UF pore sizes
•Withstands extreme temperatures
•Chemical, corrosion and erosion resistant
•Longer service life
•4-6 times higher Flux
•No thermal shock issues
•Cleans back to day 1 after CIP
•Faster cleaning and regeneration cycles
•Water hammer and back pulse options
•Asymmetrical membrane structure
•Non tainting and food safe
100% Pure Titanium Tubular Cross Flow Filtration Membrane
It’s unique, the only Ti membrane in the world
The membrane layer and the support layer are both 100% titanium metal
Its strong, its very strong!
Its only 350microns thick(0.35mm)
Available in MF and UF pore sizes
Extreme temperatures 130 °C
Extreme chemical, Corrosion & Erosionresistance
pH resistant 0.0 – 14.0, andhigh tolerance to chlorine
Long service life
High Flux (4-6 times higher)
Cleans back to day 1 after CIP
No thermal shock issues
Steam cleaning possible
Increasable tolerance to fats,oils & grease
Fast cleaning and regenerationcycles
Amazing use of water hammer and backpulse options
Asymmetrical membrane structure
Long filtration life
Non tainting, food safe.
High solids, fats, oils, grease, harsh chemicals, extreme temperature and so many more possibilities!
Flux rates over 250LMH (Avg) Very easy CIP 99.8% recovery rates Long run times No issues with algae or FOG Extreme life expectancy.
•The membrane is 100% pure titanium; this includes the active layer. Other metallic membranes use ceramic coatings
•The membrane comes in a range of diameters from 2.5mm / 0.0984” up to 10mm / 0.394” in one continuous length 1360mm.
Typical metallic membranes have short lengths welded together; the welded zone is a high corrosion area.
•It has a very thin wall thickness of 0.35mm. Metallic membranes have wall thicknesses of around 1.5mm
•Titanium weight to strength is the strongest metal known
•Titanium is corrosion resistant to chlorine
•It is corrosive resistant and can handle full PH range from 0 – 14
•Can be steam cleaned and or steam sterilized.
•Can process liquid streams containing fat, oil or grease
•Is paramagnetic and so does not attract particulate to its surface
•Has a very long-life expectancy
•Can be completely recycled
•Can be mass produced